The easiest method to ensure that the pressure washer initiates and works properly is to perform basic maintenance-related tasks. Maintenance should be performed to avoid any unannounced breakdowns and minimize costly repairs and inconveniences. Timely maintenance also ensures that it constantly operates well. However, power washer maintenance can be a difficult job. With the help of this blog, you can get all the queries answered related to your day-to-day pressure washer maintenance.

Before you begin cleaning, inspect the machine for anything that could cause an issue.

Instructions Before Using Washer

Step 1: Examine the Fluid Levels

On gasoline-powered vehicles, check the oil and fuel levels. Don't overfill the container.

Step 2: Examine the Debris Screens

You should look out for the water inlet first so that it is in such a way that the garden hose can be readily attached. Clean the screen with water if it is dirty. If it's broken, replace it. Besides that, you should also inspect the screen at the wand extension to ensure that it is not having any debris in it. It is advised to replace it to avoid any safety concerns.

Step 3: Inspect the Spray Gun and the Hose

Inspect the spray gun, wand extension, and nozzle or spray tip. Next, you should inspect the integrity of connections, especially the one that is attached to the hose pipe. The spray gun trigger and its lock should be tested. It is also advised to change the spray if it is not functioning. Also, you should inspect the integrity of the hose and replace it fi necessary.

Step 4: Examine the Detergent System

If the detergent siphoning tube is clogged, empty it out.

Step 5: Flushing Garden Hose

Prior to connecting of the garden hose, please make sure that you have drained it out completely.

Following the Use of a Pressure Washer

When you've finished cleaning, it's time to put your pressure washer away.

Step 1: Empty the Detergent System

Detergent from the power washer should be rinsed. At first, you will have to detach the siphon type to cut off the detergent supply. Secondly, you should make sure that the pressure is low. For a couple of minutes, it is advised to circulate water for effective operation.

Step 2: Depressurize the Machine

You should start off by turning off the water supply. In the next step, you should turn the pressure washer off and release line pressure by operating the hose. Let the washer sit in an open space for a while for it to cool off.

Step 3: Remove Excess Water

After step 2, you should detach all the accessories of the washer. Afterward for increasing the longevity of the machine, you should remove residual water. For the pump, you can follow the instruction provided in the pump manual.

Final Words

Maintenance of the pressure washer is quite essential for smooth operations. In this regard, you can also get some ideas from the machine manual related to preventive maintenance steps so that you can have your washer in the best condition.